Press "Input for Fluxes" to select the only parameter used here, 
the receiver number.

Then Press FLUX to enter the procedure used for checking and updating fluxes.
A new window will appear, with the fluxes of calibrators at the frequency of
the selected receiver.

1 Description
-------------------------------------------------------------------------------
Flux package for 2-receiver data                   R. Lucas 02-May-1997 
-------------------------------------------------------------------------------
This Graphic interface is used in connection with the 2-receiver calibration
procedure. It is called when pressing FLUX in the 2-receiver calibration
main window. The receiver number should be set first, and the SELECT 
opearation should have been done, ans well as, preferably, the RF and PHASE
calibrations.

Active Buttons:
---------------
Solve 		Solve for the Fluxes. At least one of the source fluxes 
		should have been entered in the input area and fixed.

Get Result	Transfer the results of the unknown fluxes to the 
		corresponding input areas.

Store		Store the fluxes in the input areas for each source into the
		data file.

Plot		Plot the saled amplitudes as a function of time, 
		for the scan range selected.

Calibrate	Return to the 2-receiver calibration main window.

2 JYPKFLUX
	The antenna efficiencies (in Jansky/Kelvin) from the last SOLVE.
        (display only)

2 SCANFLUX
	The first and last scan to be used for flux determination.
	(user input)

2 IN_FL_1
	The input flux in Janskys.
	(user input)

2 FIX_FL_1
	Fix/Unfix the source flux.
	(user input)

2 CUR_FL_1
	The last value obtained from SOLVE.
        (display only)

2 RDI_FL_1
	The value last read from the file.
        (display only)

2 IN_FL_2
	The input flux in Janskys.
	(user input)

2 FIX_FL_2
	Fix/Unfix the source flux.
	(user input)

2 CUR_FL_2
	The last value obtained from SOLVE.
        (display only)

2 RDI_FL_2
	The value last read from the file.
        (display only)

2 IN_FL_3
	The input flux in Janskys.
	(user input)

2 FIX_FL_3
	Fix/Unfix the source flux.
	(user input)

2 CUR_FL_3
	The last value obtained from SOLVE.
        (display only)

2 RDI_FL_3
	The value last read from the file.
        (display only)

2 IN_FL_4
	The input flux in Janskys.
	(user input)

2 FIX_FL_4
	Fix/Unfix the source flux.
	(user input)

2 CUR_FL_4
	The last value obtained from SOLVE.
        (display only)

2 RDI_FL_4
	The value last read from the file.
        (display only)

1 END