! this file is read by the routine def_inst.c
! each instrument shall have such a file. The name of this file must be
! exactely the same as the directory of the instrumnet data
!
# EMMI Red instrument file definition !comments
title				      ! keyword title of the inst. trans. model
EMMI Red Transmission Model		! title of the inst. trans. model
optics					!keyword for the optics/mirrors
        mirnew   mirnewntt.dat		! trans. curve of new mirror
        mirold   miroldntt.dat		! trans. curve of old mirror
	surface	9.465			! surface of the mirror M1 in m^2
	ofile	dimr53.dat		! trans. curve of the optics
	end				! keyword for the end of optics
disp					!keyword for the dispersors
!       position free			free position submenu_title
	free				rild free
! now the list for each positions of the grism_menu, there is 10 positions
!       pos.    nm/mm   file            submenu_title
	disp0	24.29	grism1.dat	rild #1 [24]
	disp1	11.6	grism2.dat	rild #2 [12]
	disp2	9.43	grism3.dat	rild #3 [9.4]
	disp3	11.23	grism4.dat	rild #4 [11]
	disp4	5.28	grism5.dat	rild #5 [5.3]
	disp5	4.81	grism6.dat	rild #6	[4.8]
	disp6	1.32	grating6.dat	remd #6 [1.3]
	disp7	2.64	grating7.dat	remd #7 [2.6]
	disp8	5.12	grating8.dat	remd #8 [5.1]
	disp9	10.85	grating13.dat	remd #13 [11]
	end				! keyword for the end of dispersors
! in the submenu_title it is nice to give the dismpersion [nm/mm]
ccd					!keyword for the cdd of the instrument
	title	CCD #36			!title of the ccd
	nccd	36			! eso number of the ccd
	pixel   0.024			! size of the pixel ccd in mm
	ron	6.			! read out noise in e-
	gain	1.38			! conversion factor e-/ADU
	end				! keyword for the end of ccd
filter					!keyword for the instrument filter 
        basic   bf_emmir.dat		! basic set file
        end				! keyword for the end of filter